#################################################################
#
#       MPD configuration file
#
# This file defines the configuration for mpd: what the
# bundles are, what the links are in those bundles, how
# the interface should be configured, various PPP parameters,
# etc. It contains commands just as you would type them
# in at the console. Lines without padding are labels. Lines
# starting with a "#" are comments.
#
# $Id: mpd.conf.sample,v 1.46 2009/04/29 11:04:17 amotin Exp $
#
#################################################################

startup:
# Задаем пароль для доступа в web-intarface
# т.е меняем password на свой пароль
#        set user usrname password just-pass
# set user password cancer
# configure the console
#        set console self 127.0.0.1 5005
#        set console open
# configure the web server
#        set web self 0.0.0.0 5006
#        set web open

default:
        load pptp_server

pptp_server:
# Видно, что имеем всего 3 одновременных подключения
        set ippool add poolsat 192.168.36.80 192.168.36.83
        create bundle template B
        set iface enable proxy-arp
        set iface idle 0
        set iface enable tcpmssfix
        set ipcp yes vjcomp

        set ipcp ranges 192.168.36.254/32 ippool poolsat
#DNS нам не нужен
#        set ipcp dns 192.168.0.254
#Wins можно оставить, если он действительно запущен
        set ipcp nbns 192.168.36.237


# Enable Microsoft Point-to-Point encryption (MPPE)
#        set bundle enable compression
#        set ccp yes mppc
#        set mppc yes compress e40 e56 e128 stateless

# Create clonable link template named L
        create link template L pptp
# Set bundle template to use
        set link action bundle B
# Multilink adds some overhead, but gives full 1500 MTU
        set link enable multilink
        set link yes acfcomp protocomp
        set link no pap chap eap
        set link enable chap
        set link enable chap-msv1
        set link enable chap-msv2
# We reducing link mtu to avoid GRE packet fragmentation.
        set link mtu 1460
        set link keep-alive 10 60

# Configure PPTP and open link
# IFFACE PPTPD
        set pptp self 26.31.130.242
# Allow to accept calls
        set link enable incoming