AlekZeiy

Эта страница только для чтения. Вы можете посмотреть её исходный текст, но не можете его изменить. Сообщите администратору, если считаете, что это неправильно.
Используя данный конфиг не корректно отрабатывалась SMTP авторизация. Проблема решена, надо было к каждому accept'у в acl_check_rcpt добавить authenticated = *

<code - exim.configure>
######################################################################
#                    MAIN CONFIGURATION SETTINGS                     #
######################################################################

primary_hostname = test.local

domainlist local_domains = test.local
domainlist relay_to_domains =
hostlist relay_from_hosts = localhost


acl_smtp_rcpt = acl_check_rcpt

INTERNAL_IP = 192.168.0.70

daemon_smtp_ports = 25

qualify_domain = test.local
allow_domain_literals = true

exim_user = mail
exim_group = exim

never_users = root

host_lookup = *
rfc1413_query_timeout = 0s
sender_unqualified_hosts = +relay_from_hosts
recipient_unqualified_hosts = +relay_from_hosts
ignore_bounce_errors_after = 2d
timeout_frozen_after = 7d

auth_advertise_hosts = *
smtp_accept_max = 200
smtp_accept_max_per_connection = 25
smtp_connect_backlog = 30
smtp_accept_max_per_host = 10
split_spool_directory = false
remote_max_parallel = 15
return_size_limit = 70k
message_size_limit = 50M

helo_allow_chars = _
smtp_enforce_sync = true

log_selector = \
    +all_parents \
    +connection_reject \
    +incoming_interface \
    +lost_incoming_connection \
    +received_sender \
    +received_recipients \
    +smtp_confirmation \
    +smtp_syntax_error \
    +smtp_protocol_error \
    -queue_run
syslog_timestamp = no

######################################################################
#                       ACL CONFIGURATION                            #
#         Specifies access control lists for incoming SMTP mail      #
######################################################################

begin acl
acl_check_rcpt:
  accept  hosts = :
  deny    message       = Restricted characters in address
          domains       = +local_domains
          local_parts   = ^[.] : ^.*[@%!/|]
  deny    message       = Restricted characters in address
          domains       = !+local_domains
          local_parts   = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
  accept  local_parts   = postmaster
          domains       = +local_domains
  accept  hosts         = +relay_from_hosts
          control       = submission
  accept  authenticated = *
          control       = submission
  require message = relay not permitted
          domains = +local_domains : +relay_to_domains
  require verify = recipient
  #Рубим тех, кто не обменивается приветственными сообщениями (HELO/EHLO)
  deny    message       = "HELO/EHLO require by SMTP RFC"
          condition     = ${if eq{$sender_helo_name}{}{yes}{no}}
  #Рубим тех, кто подставляет свой IP в HELO
  deny    message       = "Your IP in HELO - access denied!"
          hosts         =  * : !+relay_from_hosts
          condition     = ${if eq{$sender_helo_name}\
                    {$sender_host_address}{true}{false}}
  #Рубим тех, кто в HELO пихает мой IP
  deny    condition     = ${if eq{$sender_helo_name}\
                           {$interface_address}{yes}{no}}
          hosts         = !127.0.0.1 : !localhost : *
          message       = "main IP in your HELO! Access denied!"
  # Рубим хосты типа *adsl*; *dialup*; *pool*;....
  deny    message       = "your hostname is bad (adsl, ppp & etc)."
  condition     = ${if match{$sender_host_name} \
                   {adsl|dialup|peer|dhcp} \
                   {yes}{no}}
 # Задержка.
 warn
     # ставим дефолтовую задержку в 30 секунд
     set acl_m0 = 30s
  warn
     # ставим задержку в 0 секунд своим хостам и дружественным сетям
     hosts = +relay_from_hosts
     set acl_m0 = 0s
  warn
     # пишем в логи задержку
     logwrite = Delay $acl_m0 for $sender_host_name \
                [$sender_host_address] with HELO=$sender_helo_name. Mail \
                from $sender_address to $local_part@$domain.
                delay = $acl_m0

  # Проверка получателя в локальных доменах.
  accept  domains       = +local_domains
          endpass
          message       = "In my mailserver not stored this user"
          verify        = recipient
     logwrite = Accept $sender_host_name (local_domains)
 # Проверяем получателя в релейных доменах
 accept  domains       = +relay_to_domains
          endpass
          message       = "main server not know how relay to this address"
          verify        = recipient
     logwrite = Accept $sender_host_name (local_domains)

 # Рубим тех, кто в блэк-листах. Серваки перебираются сверху вниз.
 deny    message       = "you in blacklist - $dnslist_domain --> $dnslist_text"
          dnslists      = sbl-xbl.spamhaus.org : \
                          bl.spamcop.net : \
                          dul.ru : \
                          dul.dnsbl.sorbs.net : \
                          opm.blitzed.org : \
                          cbl.abuseat.org : \
                          bl.csma.biz : \
                          cbl.abuseat.org

 # Разрешаем почту от доменов в списке relay_from_hosts
  accept  hosts         = +relay_from_hosts
  logwrite = Accept $sender_host_name (relay_from_hosts)

 # Если неподошло ни одно правило.
 deny    message       = "relay not permitted"
 deny


######################################################################
#                      ROUTERS CONFIGURATION                         #
#               Specifies how addresses are handled                  #
######################################################################
#     THE ORDER IN WHICH THE ROUTERS ARE DEFINED IS IMPORTANT!       #
# An address is passed to each router in turn until it is accepted.  #
######################################################################

begin routers

dnslookup:
  driver = dnslookup
  domains = ! +local_domains
  transport = remote_smtp
  ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
  no_more

system_aliases:
  driver = redirect
  allow_fail
  allow_defer
  data = ${lookup{$local_part}lsearch{/etc/aliases}}
  user = exim
  file_transport = address_file
  pipe_transport = address_pipe

userforward:
  driver = redirect
  check_local_user
  file = $home/.forward
  allow_filter
  no_verify
  no_expn
  check_ancestor
  file_transport = address_file
  pipe_transport = address_pipe
  reply_transport = address_reply

procmail:
  driver = accept
  check_local_user
  require_files = ${local_part}:+${home}/.procmailrc:/usr/bin/procmail
  transport = procmail
  no_verify

localuser:
  driver = accept
  check_local_user
  transport = procmail
  cannot_route_message = Unknown user

######################################################################
#                      TRANSPORTS CONFIGURATION                      #
######################################################################
#                       ORDER DOES NOT MATTER                        #
#     Only one appropriate transport is called for each delivery.    #
######################################################################
begin transports

remote_smtp:
  driver = smtp

procmail:
  driver = pipe
  command = "/usr/bin/procmail -d $local_part"
  return_path_add
  delivery_date_add
  envelope_to_add
  user = $local_part
  group = mail
  initgroups
  return_output

local_delivery:
  driver = appendfile
  file = /var/mail/${local_part}
  delivery_date_add
  envelope_to_add
  return_path_add
  group = mail
  mode = 0660
  no_mode_fail_narrower

address_pipe:
  driver = pipe
  return_output

address_file:
  driver = appendfile
  delivery_date_add
  envelope_to_add
  return_path_add

address_reply:
  driver = autoreply

######################################################################
#                      RETRY CONFIGURATION                           #
######################################################################

begin retry

# Address or Domain    Error       Retries
# -----------------    -----       -------

*                      *           F,2h,15m; G,16h,1h,1.5; F,4d,6h

######################################################################
#                      REWRITE CONFIGURATION                         #
######################################################################
# There are no rewriting specifications in this default configuration file.

begin rewrite

######################################################################
#                   AUTHENTICATION CONFIGURATION                     #
######################################################################

LOGIN:
    driver = plaintext
    public_name = LOGIN
    server_prompts = "Username:: : Password::"
    server_condition = "${if pam {$auth1:$auth2}{yes}{no}}"
    server_set_id = $auth1

PLAIN:
    driver = plaintext
    public_name = PLAIN
    server_condition = "${if pam {$auth2:$auth3}{yes}{no}}"
    server_set_id = $auth2
</code>